Product ID:340 SEMI-GLOSS CATALYST, 340SG
MSDS Date:08/15/1986
FSC:8010
NIIN:00N027860
MSDS Number: BQBLM

CARDINAL INDUSTRIAL FINISHES

1329 POTRERO AVE SO
EL MONTE, CA 91733
US

Emergency Phone: 818-444-9274

Info Phone: 818-444-9274

Preparer: RICHARD STEWART

Cage: 65860

CARDINAL INDUSTRIAL FINISHES

SOUTH EL MONTE, CA 91733 US

Telephone: 818-444-9274 OR 213-283-9335

Cage: 65860

BENZENE, 2,4-DIISOCYANATO-1-METHYL;

CAS: 584-84-9

RTECS: CZ6300000

Fraction By Weight: 0.18%

OSHA PEL C 0.02 PPM

ACGIH TLV: 0.005 PPM/0.02 STEL

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS

HEXANE, 1,6-DIISOCYANATO-; (HEXAMETHYLENE DIISOCYANATE)

CAS: 822-06-0

RTECS: MO1740000

Fraction By Weight: 0.20%

OSHA PEL N/K

ACGIH TLV: 0.005 PPM

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

10

CAS: 123-86-4

RTECS: AF7350000

Fraction By Weight: 2.44%

OSHA PEL 150 PPM

ACGIH TLV: 150 PPM/200 STEL

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

2-BUTANONE; (METHYL ETHYL KETONE) (SARA 313) (CERCLA).

CAS: 78-93-3

RTECS: EL6475000

Fraction By Weight: 1.49%

OSHA PEL 200 PPM

ACGIH TLV: 200 PPM/300 STEL

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

76 @

CAS: 141-78-6

RTECS: AH5425000

Fraction By Weight: 5.59%

OSHA PEL 400 PPM

ACGIH TLV: 400 PPM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:EYES: CAN CAUSE SEVERE IRRITATION,
REDNESS, TEARING, BLURRED VISION. SKIN: PROLONGED CONTACT CAN CAUSE
MODERATE IRRITATION, DEFATTING, DERMATITIS. INHAL: NASAL IRRIT,
DIZZ, WEAKNESS, NAUSEA, HDCH, UNC ON. INGEST: CAN CAUSE GI IRRIT,
NAUS, VOMIT, DIARRHEA.
Explanation of Carcinogenicity:TOULENE DIISOCYANATE (2,4): IARC GROUP
2B, NTP ANTICIPATED TO BE CARCINOGEN .
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:ALLERGIC REACTION POSSIBLE. AVOID
USE BY PERSONS WITH RESPIRATORY PROBLEMS.

First Aid:EYES: FLUSH WITH WATER FOR AT LEAST 15 MIN. GET MED ATTN.
SKIN: WASH EXPOSED AREA WITH SOAP AND WATER. REMOVE CONTAMINATED
CLOTHING. INHAL: REMOVE TO FRESH AIR. IF BREATHING IS DIFFICULT,
ADMINISTER O *2. IF BREATHING HAS STOPPED, GIVE ARTFRESP. GET MED
ATTN. INGEST: DO NOT INDUCE VOMIT. KEEP PERSON WARM, QUIET, AND GET
MED HELP.

Flash Point Method:TOC
Flash Point:24.0F,-4.4C
Lower Limits:1.0%
Extinguishing Media:FOAM, CO*2, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:GROUND CONTAINERS, KEEP AWAY FROM SOURCES
OF IGNITION. IRRITANT &/OR TOXIC GASES MAY BE RELEASED DURING
COMBUSTION.

Spill Release Procedures:ELIMINATE ALL IGNITION SOURCES, ABOSRB LIQUID
IN ABSORBANT MATERIAL AND PREVENT SPREADING TO GROUND WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:CONTR OF MATL MAY BE HAZ WHEN EMPTIED,
SINCE EMPTIED CONTR RETAIN PROD RESIDUALS (VAP/LIQ/SOLID), ALL HAZ
PREC GIVEN IN DATA SHEET MUST BE OBSERVED.
Other Precautions:OVEREXP HAS APPARENTLY BEEN FOUND TO CAUSE FOLLOWING
EFTS IN LAB ANIMALS; LIVER ABNORM, KIDNEY/LUNG DAM. ALSO OVEREXP TO
MATL HAVE BEEN SUGGESTED AS CAUSE OF FOLLOWING EFTS IN HUMANS:
CARDIAC ABNORMAL ITY, LIVER ABNORM, KIDNEY/LUNG DAM.

Respiratory Protection:IF TLV OF PROD/ANY COMPONENT IS EXCEEDED,
NIOSH/MSHA APPROVED AIR SUPPLIED RESP IS ADVISED IN ABSENCE OF
ENGINEERING CTRLS. ANY RESP USED SHOULD MEET RQUIREMENTS FOR
ISOCYANATE CNTNG ENVIRONMENTS. (SE E YOUR SFTY EQUIP (SUPP DATA)
Ventilation:PROVIDE SUFFICIENT MECH (GEN &/OR LOC EXHAUST) VENTILATION
TO MAINTAIN EXPOSURE BELOW TLV(S).
Protective Gloves:WEAR RESISTANT GLOVES SUCH (SUPP DATA)
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:PREVENT REPEATED OR PROLONGED SKIN CONTACT
WITH GB PROTECTIVE HANDCREAM, WEAR IMPERVIOUS CLTHG & CHEM
RESISTANT BOOTS.
Work Hygienic Practices:"WASH HANDS BEFORE EATING OR USING RESTROOM,
SMOKE IN SMOKING AREAS ONLY".
Supplemental Safety and Health
RESP PROT: SUPPLIER). ENGINEERING AND ADMINISTRATIVE CONTROLS SHOULD BE
IMPLEMENTED TO REDUCE EXPOSURE. PROT GLOVES: AS: POLYVINYL ALCOHOL
COATED OR POLYETHYLENE.

HCC:F3
Boiling Pt:B.P. Text:>167F,75C
Vapor Pres:SEE INGRED
Vapor Density:HVR/AIR
Spec Gravity:1.15
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:13.21

Stability Indicator/Materials to Avoid:YES
WATER, ALCOHOLS, AMINES, STRONG BASES, AND SURFACE ACTVIE MATERIALS.
Stability Condition to Avoid:CONTACT WITH MOISTURE. EXTREME HEAT OR
PRESSURE.
Hazardous Decomposition Products:HYDROGEN CYANIDE, CO*2, OXIDES OF
NITROGEN, MONOMERIC ISOCYANATES.

Waste Disposal Methods:DESTROY BY LIQUID INCINERATION IN ACCORDANCE
WITH APPLICABLE REGULATIONS. CONTAMINATED ABSORBANT MAY BE
DEPOSITED IN LANDFILL IN ACCORDANCE WITH LOCAL, STATE, AND FEDERAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.